The best performance in cracked concrete with the least installation effort.

Highbond anchor FHB II-A S

The fischer Highbond anchor FHB II-A S is a system component of the fischer Highbond-System FHB II. The force-controlled expanding composite anchor is ideal for fixing maximum loads in cracked and non-cracked concrete. The threaded rod can be used with approval either with the injection mortar FIS HB FIS HB or the resin capsules FHB II-P and FHB II-PF HIGH SPEED. The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances as well as thin concrete members. The low anchorage depth of the FHB II-A S reduces the drill and installation work. No drill hole cleaning is required for installation with the resin capsules. This allows a particularly economical and time-saving fixing.

Productvarianten

Download of image data

Productvarianten

Goedkeuringen / Testrapporten

46 Product varianten

Drill diameter

Drill hole depth

Anchorage depth

Max. fixture thickness

Thread

Width across nut

Legenda = Goedkeuring beschikbaar— = Goedkeuring niet beschikbaar

Meer resultaten

36 van 46 artikelen bekeken

Advantages

The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.

Applications

Suitable for:

Guard rails
Façades
Staircases
Steel brackets
Masts
Rash protection
Steelwork constructions
Timber constructions

Ideal for:

Push-through installation

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Suitable for:

Concrete C12/15

De details (bouwmaterialen, belastingen, etc.) van de beschikbare goedkeuring zijn van toepassing.

Certificering

ETA-05/0164
ETA-21/0948
DoP No. 0282
DoP No. 0293
DoP No. 0327
GS 3.2/16-352-1
(2103/12/12) - CM

Functionality

The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 5

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

Gecreëerd op 14.12.2017 г.

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

Gecreëerd op 19.01.2021 г.

ETA Certification Document

pdf, ETA-21/0948

European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life

Gecreëerd op 09.09.2022 г.

DOP - Declaration of Performance

pdf, DoP No. 0327

Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)

Gecreëerd op 16.09.2022 г.

DOP - Declaration of Performance

pdf, DoP No. 0293

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded expansion fastener for use in concrete)

Gecreëerd op 03.01.2022 г.

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Geldig van 07.02.2017 г.
tot 06.02.2027 г.

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Geldig van 15.07.2021 г.
tot 15.07.2026 г.

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A S

Load Table

pdf,

Highbond-Anchor FHB II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Installation Instructions

pdf,

fischer FHB II

ETA-approval
Drill diameter ( d₀ )	25 mm
Drill hole depth ( h₀ )	190 mm
Anchorage depth ( h_ef )	170 mm
Max. fixture thickness ( t_fix )	50 mm
Thread ( M )	M24
Width across nut	36 mm
Scale parts mortar	26
Packaging	Folding box
Amount	4 pcs
GTIN (EAN-Code)	4006209972977

ETA-approval
Drill diameter ( d₀ )	25 mm
Drill hole depth ( h₀ )	190 mm
Anchorage depth ( h_ef )	170 mm
Max. fixture thickness ( t_fix )	70 mm
Thread ( M )	M24
Width across nut	36 mm
Scale parts mortar	26
Packaging	Folding box
Amount	4 pcs
GTIN (EAN-Code)	4048962356687

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t_fix )	10 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209976302

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t_fix )	100 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209976340

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t_fix )	20 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209976319

Highbond anchor FHB II-A S

Productvarianten

Productomschrijving

Toepassing en goedkeuring

Montage instructies

Documenten om te downloaden

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	90 mm
Anchorage depth ( h_ef )	75 mm
Max. fixture thickness ( t_fix )	10 mm
Thread ( M )	M12
Width across nut	19 mm
Scale parts mortar	4
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209976357