The undercut anchor with an internal thread for M8 threaded screws for natural stone or artificial concrete panels.

Zykon panel anchors FZP II M8i Carbon

The undercut anchor with internal thread for a concealed flush or stand-off installation of heavy façade panels out of natural stone. Calibrated panels or reveal panels can be flush mounted and panel tolerances can be adjusted through the stand-off installation. Due to the internal thread, there is no protruding external thread. Thus panels can be prefabricated and transported in a space-saving manner. This improves the economic efficiency and flexibility of the system.

Produktvarianten

Download of image data

Produktvarianten

Zulassungen / Prüfberichte

3 Produktvarianten

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Legende = Zulassung vorhanden— = Zulassung nicht vorhanden

Gesehen 3 von 3 Variante(n)

Advantages

The flush-mounted anchor allows for easy, economical construction of reveals.
Depending on the application, the user can choose between flush installation with an absolute anchoring depth, for instance for reveal panels, and stand-off installation technology with a constant remaining wall thickness that serves as a reference dimension to compensate panel thickness tolerances.
There is no protruding external thread, allowing a space-saving transportation of pre-fabricated façade panels.
The matching shape of the undercut anchor creates an inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.

Functionality

The hole is either drilled to a constant reference dimension for the remaining wall thickness (RWT) or with an absolute anchoring depth.
The anchor can be installed flush or stand-off.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Wet diamond drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 4

ETA-approval
Min. panel thickness	20 mm
Embedment depth ( h₁ )	12 mm
Total length ( l )	12 mm
Installed anchor length ( a )	12 mm
Remaining thread length ( b )	0 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	15 mm
Undercutdiameter ( d₁ )	17,5 mm
System	—
Contents	Including dust protection cap
Amount	250 pcs
GTIN (EAN-Code)	4048962269826

ETA-approval
Min. panel thickness	25 mm
Embedment depth ( h₁ )	15 mm
Total length ( l )	15 mm
Installed anchor length ( a )	15 mm
Remaining thread length ( b )	0 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	15 mm
Undercutdiameter ( d₁ )	17,5 mm
System	—
Contents	Including dust protection cap
Amount	250 pcs
GTIN (EAN-Code)	4048962269833

ETA-approval
Min. panel thickness	35 mm
Embedment depth ( h₁ )	21 mm
Total length ( l )	21 mm
Installed anchor length ( a )	21 mm
Remaining thread length ( b )	0 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	15 mm
Undercutdiameter ( d₁ )	17,5 mm
System	—
Contents	Including dust protection cap
Amount	250 pcs
GTIN (EAN-Code)	4048962278187

Zykon panel anchors FZP II M8i Carbon

Produktvarianten

Die Vorteile / Produktbeschreibung

Anwendung und Zulassung

Montageanleitung

Dokumente zum Download