Design for thin panels, such as fibre cement or HPL.
Stress-free fixing enables high loads and use of thin panels.
The distance washers ensures a controlled, stress-free rotation of attachment parts.
Παρελκόμενα
Art.-Nr. 802522
SGB/230V
Art.-Nr. 802669
SGT
Art.-Nr. 802732
HVL 11T
Art.-Nr. 802484
BSN 101T
Art.-Nr. 522398
FZPB 11T CNC
Art.-Nr. 802507
MST-D
Art.-Nr. 804089
DPL 11T
Art.-Nr. 802506
STU 10-30
Art.-Nr. 522402
FZPB 11T D12
Art.-Nr. 541464
FZPB 11T CNC-DIA
Art.-Nr. 803749
SGA-M6
Πλεονεκτήματα / Περιγραφή προϊόντος
The specialist for thin façade panels, such as HPL and fibre cement.
Advantages
The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.
The concealed fixing solution for thin façade panels, such as HPL, fibre cement and solid surface panels. Use in conjunction with clasps systems on façades or with other attachments.
Εφαρμογές και πιστοποιητικά
Applications
For high aesthetical requrements:
The concealed fixing of thin façade panels on exterior and interior façade as well as reveal panels.
Building materials
Fibre cement
HPL panels
Thin panel materials (≥ 8 mm)
Μπορείτε να βρείτε λεπτομερείς πληροφορίες σχετικά με τα δομικά υλικά στο έγγραφο καταχώρισης.
Οδηγίες τοποθέτησης
Functionality
Dry drilling in fibre cement.
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
Drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
