The pre-assembled anchor with innovative steel-plastic nail.

Render fixing FIF-CN II 8

The ETA approved fischer render fixing FIF-CN II is ideal for securely fixing pressure-resistant insulation up to 350 mm thick in the plaster façade such as polystyrene boards, mineral wool boards, wood wool lightweight panels and cork boards / coir matting in concrete, solid and perforated brick. The render fixing comprises a grey plug sleeve with attached preshaped octogonal disc and a steel-plastic nail. The FIF-CN II is set using a hammer. The innovative plastic nail with a steel point supports high loads.

Variantes de productos

Download of image data

Variantes de productos

Aprobaciones / informes de pruebas

15 Variantes del producto

Drill diameter

Min. drill hole depth

Anchor length

Max. fixture thickness

Disc ø

Amount

Leyenda = Permiso disponible— = Permiso no disponible

Visto 15 de 15 variante (s)

Advantages

To set with few hammer blows.
The plate fits tight into the insulation thanks to its thickness of only 2.7 mm. Thus allows the application of low-cost, thin reinforcement layers.
High retention forces thanks to the steel tip of the compound nail.
Small anchoring depth of 35 mm saves on drilling times.
The compression zone in the shank allows the plate to be drawn in precisely.
For insulating material thicknesses up to 340 mm.

Applications

Fixing of ETICS insulation boards on concrete and masonry
Flush-to-surface installation in ETICS insulating materials like mineral wool or polystyrene

Building materials

Building material classes A, B, C, D, E
Concrete
Full blocks made from concrete
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

* Puede encontrar información detallada sobre materiales de construcción en el documento de registro.

Aprobación

ETA-18/0393
DoP No. 0255
EPD-FIW-20210314-CBD1-EN

ETA Certification Document

pdf, ETA-18/0393

European Technical Assessment for fischer FIF-CN II - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Creado el 29.05.2018 г.

DOP - Declaration of Performance

pdf, DoP No. 0255

Declaration of Performance for FIF-CN II (Plastic anchors for use in concrete and masonry)

Creado el 15.01.2021 г.

EPD - Environmental Product Declaration

pdf, EPD-FIW-20210314-CBD1-EN

Environmental Product Declaration for fischer Insulation fixings

Válido de 22.02.2022 г.
a 21.02.2027 г.

Load Table

pdf,

Render fixing FIF-CN II - ermissible loads for a single anchor for fixing of external thermal insulation composite systems with rendering.

Hammer drill bit Quattric II S / Quattric II
95 Variantes

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Anchor length ( l )	108 mm
Max. fixture thickness ( t_fix )	70 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962329919

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Anchor length ( l )	128 mm
Max. fixture thickness ( t_fix )	90 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962329926

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Anchor length ( l )	148 mm
Max. fixture thickness ( t_fix )	110 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962329933

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Anchor length ( l )	168 mm
Max. fixture thickness ( t_fix )	130 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962329940

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Anchor length ( l )	188 mm
Max. fixture thickness ( t_fix )	150 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962329957

Render fixing FIF-CN II 8

Variantes de productos

Las ventajas / descripción del producto

Solicitud y aprobación

Instrucciones de montaje

Documentos para descargar