货号 71204

GTIN (EAN-Code): 8001132712047

fischer double-threaded screw STSR M12 x 300 mm A2 stainless steel A2

Name: fischer double-threaded screw STSR M12 x 300 mm A2 stainless steel A2
Brand: fischer

产品型号

Download of image data

Top Features

Lower thread for wood
Upper metric thread
Incorporated EPDM gasket
Made of A2 stainless steel

艺术编号046703
FIS H 20 x 130 K
艺术编号071749
MU F M12 A2
艺术编号050474
FIS H 20 x 85 N
艺术编号046704
FIS H 20 x 200 K
艺术编号045707
FIS H 18 x 130/200 K
艺术编号071206
SSP 12 A2
艺术编号518952
MW SA A2
艺术编号522676
MW SU A2

Double-threaded screw for fixing photovoltaic systems on corrugated panel or faux-barrel tile roofs to a load-bearing structure in wood, concrete or brick and cement.

Advantages

The STSR double-threaded screw is supplied pre-assembled with EPDM gasket, tightening nut and pair of nuts for connection to the MW or SSP brackets.
Quick installation because the roofing must not be removed during installation.
Due to the EPDM gasket, the waterproofness of the roof is maintained.

STSR is the double-threaded screw in A2 stainless steel for fixing subframes of photovoltaic systems on corrugated panel or faux-barrel tile roofs with wooden load-bearing structure. Also suitable for installation on concrete with chemical injection mortar or in brick and cement structure with chemical injection mortar and FIS HK or FIS HN injection anchor sleeves. Incorporated EPDM gasket for sealing against rain infiltration.

Properties

Concrete beams and slabs
Brick and concrete ceilings
Wooden beams

Applications

Suitable for corrugated panel roof systems with:

SolarFish H33
SolarFish H44

Fixing of STSR double-threaded screw:

With FIS V chemical anchor on concrete beams and slabs
With FIS V chemical injection mortar and FIS HK injection anchor sleeve in brick and concrete ceilings
Directly on wooden beams after drilling the pilot hole

Building materials

Concrete beams and slabs
Brick and concrete ceilings
Wooden beams

您可以在注册文件中找到有关建筑材料的详细信息。

批准

TUV - R 60154136

Functionality

Identify the length of the STSR double-threaded screw depending on the thickness of the load-bearing structure.
Determine the centre distance of the STSR double-threaded screws according to the snow and wind loads of the installation area and inclination of the roof.
Identify the position of the STSR double-threaded screws depending on the load-bearing structure and the layout of the installation.
Drill the support according to the diameter of the screw and the type of support.
Fix the STSR double-threaded screw to the structure by putting the EPDM rubber in contact with the roof.
Tighten the MU nut on the gasket to maintain waterproofness.
FIx the SSP or MW connection plate, adjusting its height using the MU F nuts.
Carefully seal the exit point of the screw from the roof with bituminous sealant.

Mounting Strip 1 Picture

1 / 10

Mounting Strip 2 Picture

1 / 8

Mounting Strip 3 Picture

1 / 6

Length ( l )	300 mm
Shaft length ( L )	35 mm
Wood thread length ( l₁ )	100 mm
Metric thread length	150 mm
Thread ( M )	M12
Diameter ( d )	11 mm
Width across nut	18 mm
Width across nut ( SW₁ )	9 mm
Amount	25 pcs
GTIN (EAN-Code)	8001132712047

fischer double-threaded screw STSR M12 x 300 mm A2 stainless steel A2

优点/产品说明

应用和认证

安装说明

技术数据

文档下载