Bracket for standing seam panels with flat seaming
Two-screw fixing
3 mm increased thickness
Upper slot for profile adjustment
Complete with bolts and screws for connection to the rail
Made of AISI 304 stainless steel
Предимства / Описание на продукта
Stainless steel bracket for fixing structures of photovoltaic systems on standing seam panels. Suitable for flat seaming.
Advantages
The bracket is supplied complete with screws for connecting the rails.
Due to the AISI 304 stainless steel with increased thickness of 3 mm, the bracket is very robust.
The two-screw closure for a strong grip on the panel enables a secure fixing.
DLA is the AISI 304 stainless steel bracket for building structures of photovoltaic systems on standing seam roofs. Suitable for flat seaming. The system already contains the screws for connection to the rail.
Properties
X5CrNi 18-10 stainless steel bracket in accordance with EN 10088-2:2005
Class A2-70 stainless steel bolts in accordance with EN ISO 3506-1/2:2010
Приложение и одобрение
Applications
Suitable for standing seam with:
SolarLight rail
SolarFish rail
Одобрения
TUV - R 60154136
Инструкции за монтаж
Functionality
Determine the position and centre distance of the brackets according to the snow and wind loads of the project installation area and the conformation of the standing seam.
Position a layer of CG INT butyl adhesive tape on the panel at the points where the brackets will be positioned.
Position the bracket on the panel on the seam. Lower the bracket until the bend completely exceeds the thickness of the seam.
Tighten the two nuts to tighten the bracket around the panel seam.
Connect the bracket to the rail by passing the supplied screws inside the lower groove of the rail and through the slot on the top of the bracket.
Mounting Strip 1 Picture
1 / 5
1
2
3
4
5
Технически данни
Installation torque (
Tinst
)
10 Nm
Width across nut
13 mm
Weight
0,33 kg
Contents
10 hooks DLA A2 10 hex head screws SKS M8 x 20 A2 30 hexagonal nuts MU F M8 A2 20 pan head screws M8 x 20 A2
