For highest demands. Powerful and flexible.

Bolt anchor FAZ II Plus

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps.

Варианти на продуктите

Download of image data

Варианти на продуктите

Schválení / zkušební protokoly

102 variant výrobku

Drill diameter

Min. drill hole depth for through fixings

Max. usable length hef,stand./hef,min.

Anchor length

Thread

Width across nut

Vysvětlivky = Povolení dostupné— = Povolení nedostupné

Načíst další

Zobrazeno 18 z 102 variant

Advantages

Quick and easier assembly without the need for drill hole cleaning (M8-M24).
Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.
The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point.
The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.
The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage.

Applications

Steel constructions
Guard rails
Consoles
Tunnels
Lifts
Lifting platforms
Conveyor belts
Pumps
Ladders
Cable trays
Machines
Staircases
Façades
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Suitable for:

Concrete C12/15 - C80/95 (classification available)
Steel fiber concrete (classification available)
Solid sand-lime brick (classification available)

Подробна информация за строителните материали можете да намерите в регистрационния документ.

Одобрения

ETA-19/0520
ETA-20/0897
DoP No. 0334
DoP No. 0337
3023222
ESR-2948
BZS D 23-607
EPD-Kiwa-EE-181454-EN
EPD-Kiwa-EE-181455-EN
EPD-Kiwa-EE-181456-EN

Functionality

The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
In case of seismic demands, the annular gap can be filled using the filling disc FFD.
For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength ≥ 50 N/mm² e.g.: FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

Mounting Strip 3 Picture

1 / 8

ETA Certification Document

pdf, ETA-19/0520

European Technical Assessment for fischer Bolt Anchor FAZ II Plus, FAZ II Plus R, FAZ II Plus HCR - Mechanical fasteners for use in concrete

Създаден на 24.05.2023 г.

DOP - Declaration of Performance

pdf, DoP No. 0334

Declaration of Performance for for fischer Bolt Anchor FAZ II Plus, FAZ II Plus R, FAZ II Plus HCR (Mechanical anchor for use in concrete)

Създаден на 31.05.2023 г.

ETA Certification Document

pdf, ETA-20/0897

European Technical Assessment for fischer Bolt Anchor FAZ II Plus dynamic - Post-installed fasteners in concrete under fatigue cyclic loading

Създаден на 22.05.2023 г.

DOP - Declaration of Performance

pdf, DoP No. 0337

Declaration of Performance for for fischer Bolt Anchor FAZ II Plus dynamic (Post-installed fastening in cracked or uncracked concrete)

Създаден на 05.06.2023 г.

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

ICC Certification

pdf, ESR-2948

ICC-ES Evaluation Report

Валиден от 01.01.2024 г.
до 31.01.2026 г.

Swiss shock certifcate

pdf, BZS D 23-607

Approval for fischer Bolt Anchor FAZ II Plus, FAZ II Plus R, FAZ II Plus HCR M10 - M24

Валиден от 24.07.2023 г.
до 30.06.2033 г.

EPD - Environmental Product Declaration

pdf, EPD-Kiwa-EE-181454-EN

Environmental Product Declaration for fischer Bolt anchor FAZ II Plus ZP

Валиден от 16.12.2024 г.
до 16.12.2029 г.

EPD - Environmental Product Declaration

pdf, EPD-Kiwa-EE-181455-EN

Environmental Product Declaration for fischer Bolt anchor FAZ II Plus R

Валиден от 16.12.2024 г.
до 16.12.2029 г.

EPD - Environmental Product Declaration

pdf, EPD-Kiwa-EE-181456-EN

Environmental Product Declaration for fischer Bolt anchor FAZ II Plus HCR

Валиден от 16.12.2024 г.
до 16.12.2029 г.

Load Table

pdf,

Bolt anchor FAZ II Plus - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Bolt anchor FAZ II Plus dynamic - Design values for cyclic fatigue loading of a single anchor in cracked or non-cracked normal concrete of strength class C20/25.

Marketing Documents

pdf,

FAZ II Plus.

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	60 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Anchor length ( l )	65 mm
Thread ( ø x length )	M6 x 25 mm
Width across nut	10 mm
Installation torque ( T_inst )	8 Nm
Contents	—
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962461978

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Max. usable length hef,stand./hef,min. ( t_fix )	20 / - mm
Anchor length ( l )	75 mm
Thread ( ø x length )	M6 x 35 mm
Width across nut	10 mm
Installation torque ( T_inst )	8 Nm
Contents	—
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962461985

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 20 mm
Anchor length ( l )	75 mm
Thread ( ø x length )	M8 x 38 mm
Width across nut	13 mm
Installation torque ( T_inst )	20 Nm
Contents	—
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962461992

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Anchor length ( l )	75 mm
Thread ( ø x length )	M8 x 38 mm
Width across nut	13 mm
Installation torque	—
Contents	2 x FAZ II Plus 8/10
Packaging	Blister card
Amount	2 pcs
GTIN (EAN-Code)	4006209909195

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Anchor length ( l )	75 mm
Thread ( ø x length )	M8 x 38 mm
Width across nut	13 mm
Installation torque ( T_inst )	20 Nm
Contents	—
Packaging	without
Amount	1 pcs
GTIN (EAN-Code)	4006209405499

Bolt anchor FAZ II Plus

Варианти на продуктите

Предимства / Описание на продукта

Приложение и одобрение

Инструкции за монтаж

Документи за изтегляне